Judge Yachts – The Chesapeake Bay Has More Than Just Blue Claws
By Scott Shane
Work boats have long been the staple of baymen and ocean fishermen for centuries. They are mostly basic, spartan and sturdy hulls built for a purpose. As recreational fishermen took notice, some builders added creature comforts and sleeker designs to attract those who might be looking for a bit more. Maryland-based Judge Yachts has been producing Chesapeake-style boats and has embraced the trend of more speed and streamlining a proven commodity.
Boatbuilders and designers worldwide adapt to local sea and climate conditions. There’s the knock-down the spray, Carolina flare for running nasty inlets and mean oceans. Downeasters plow through open crusty, big seas, offering large and stable cockpits and work areas for lobster and offshore fishermen, many times in frigid conditions. Florida-style boats opt for more open, day-boat designs where warm weather is prevalent.
“The Chesapeake deadrise is a purpose-built powerboat designed to meet the challenges of working the bay. Its basic design evolved over about 140 years of hard work at multiple tasks under varying conditions on our wide-open, shallow and choppy Chesapeake Bay,” John Page Williams wrote in an article for Chesapeake Bay magazine.
From a design perspective, a boat’s deadrise refers to a line rising upward from the keel to the chine, which determines the V-shape of the bottom of the hull. The angle of deadrise is normally measured at the transom even though the angle will usually vary toward the bow where it gets sharper to meet the waves.
“Old-time builders sometimes expressed deadrise in inches, but today it is more commonly measured in degrees. Most work boats, like their sailing predecessors, the skipjacks, have 5 to 10 degrees of deadrise, while a modern, high-speed powerboat might have as much as 24 degrees. Traditional deadrise hulls were built with cross-planked bottoms meeting horizontally planked sides. Bill Judge in Denton, Maryland, has assembled tooling for several deadrise hulls of 22- to 42- feet, Williams wrote.
The large work areas with low gunnels are traditional for the pilothouse-forward boats plying the bay. An increase in deadrise worked its way into the current fleet combining the shallow draft with a more friendly, head-sea entry.
Offshore seas are certainly nothing to be nonchalant about. That said, when its wind against tide as the huge Chesapeake Bay empties, standing 6-footers are very real; been there, done that.
“Our build process begins when the first strip of fiberglass is hand laid. I spend time with each new owner to discuss their dreams for the boat—where it will go, what it will do, what purpose it will serve. Then we customize the design. The final product is a boat that has everything he wants and nothing he doesn’t,” Judge told Jay Fleming in an article in Angler’s Journal.
Therefore, there are many different configurations of the original design of Judge boats out there, over the many decades the company has been in business. There are certain parameters that remain constant, but the rest were owner inspired. As boats changed hands, each skipper adapted or re-configured to their needs.
Ryan Dietrich, whose homeport is Hempstead Harbor, New York, runs his 2003 32-footer Jessica Marie for local fishing excursions, with some family trips mixed in on the Long Island Sound and beyond. Sea conditions on certain days can and do resemble those of the Chesapeake Bay.
“The boat is extremely stable and my fishing involves a lot of drifting in beam-to seas and it really shines. In the fall, we anchor quite often and it always sets up quickly, and sits steady in the oncoming seas once tight on the line,” Dietrich said.

A single, 330-hp Cummins 6BTA application powers the boat and Dietrich said he gets a 16- to 17-knot cruise, depending upon load; top end is 21 knots. Following sea handling is consistent with the design, though his cut keel helps to keep her on track.
“My 6-month-old was aboard for one trip. As we entered the infamous Plum Gut we encountered tightly packed 4- to 6-footers for quite a few miles; a drop on the throttle led to a safe pass through the area, there never was reason for concern,” he said.
Judge Yachts has worked with a few different hulls over the years — the Judge 36 was originally a William Marine 36 built in Chestertown, Maryland. Art Barstow has a 31 JC hull that was finished by Judge Yachts; his homeport is Atlantic City, New Jersey. The Cheryl Lynne is powered by a 375-hp 3208 CAT and pushes along at 14-15 knots.
“I’m the second owner of the boat. It was originally set up to be a more cruiser, but we transformed it to a fish boat. We just returned from a trip to Wilmington Canyon, a 70-mile steam, and we burned 165 gallons, we hold 300. The boat trolls really well, the wash is super clean,” Barstow said.
“The single engine is more economical to maintain and if the weather turns, the pilothouse is comfortable for a crew of five. I also added cockpit controls, which makes handling fish by the boat easier. Our keel was cut down, so while following seas are not the boat’s favorite, it’s manageable,” he said.
As Judge Yachts evolved over the years, new models were introduced and the express fish-boat styling became more fluent and typical of what some of the production builders were doing, yet kept a distinctive Judge flavor.
Glen Kapoosuzian recently sold his 47-foot custom Torres flybridge boat to downsize. His fishing habits and crew went in a different direction. He found a 2006 34 Judge Express on the market and fell in love with the flowing lines, comfortable ride, accessibility to machinery and the very ample cockpit area.
“This boat has everything I need, very little of what I don’t. It’s a perfect size for how we currently fish. My crew of four is comfortable whether we’re inshore or off. The engine room is laid out well and the fact (that) in the case of major engine work you can remove the entire helm deck was very appealing,” he said.
“The other aspect that sold me on the boat is the twin, Cummins (380-hp) are extremely economical to run. At 2,400 rpms, we’re pushing 26 knots and burning approximately a mile per gallon,” Kapoosuzian said.
He has many years of custom boats under his belt and says the fit and finish and quality of his Judge is on par with his expectations.
Judge Yachts continues to keep up with the times and now includes new and larger outboard powered vessels to broaden beyond the traditional tried and true Chesapeake styling the brand has been known for and still produces.

\BOTTOM LEFT & RIGHT: The Jessica Marie, a 2003 Judge 32 Express.








![furuno safety 468x60[61]](https://biggamefishingjournal.com/wp-content/uploads/Furuno-Safety-468x6061-2.gif)



