Merritt 43
The Face and Profile of Sportfishing
The editors at Power and Motoryacht magazine recently ran an article, “Majestic Triumphs,” selecting 25 of what they deemed the prettiest boats (October 2015). The opening photo for the spread was a Merritt 43.
“Sure she can raise fish … she has also raised eyebrows since she arrived on the scene. A sweet sheer-line and proud bow provide balance to a deckhouse, flying bridge and tuna tower in an ineffable synthesis of form and function,” was their spot-on assessment.
That pretty much says it all about the sportfisherman the Florida-based Merritt Yard created in 1968. Today, Merritt has grown to produce larger and more highly customized, sportfishermen, using the latest technologically and advanced materials.
The classic 43-footer, designed by Roy Merritt, and was the natural progression from its predecessor, the groundbreaking and formidable 37-footer. According to the Merritt web site, ‘the 43 has established more tuna-fishing records won more tournaments and set more all tackle marlin records possibly than any boat in history.’
“I don’t know if it was a perfect boat, but I do think it was the right boat for the time,” says Roy Merritt on the site.
In 1976, Jim Hardie penned an article in Motor Boat and Sailing about the 43-foot No Problem. That was the first of the cold-molded, rather than frame built, Merritt 43s. According to his report, the boat was made with a double sheet of plywood with the grain diagonal, and two layers of fiberglass. The sides are quarter-inch plywood layers with woven roving in between, and the bottom layers of three-eighths-inch plywood.
Wood materials are proven to have excellent strength to weight ratio and offer superior sound insulation over fiberglass. Cold-mold construction utilizes a jig to which the hull is planked and shaped. When the hull is completed and flipped, latitudinal and longitudinal stringers are secured in place fore and aft to strengthen the form. Merritt and Rybovich were the innovators for this method, influencing most modern builders using this technique.
“Depending on what equipment you install, the ballpark figure is $235,000 to $250,000. Back in the early 1960s, you couldn’t put more than $50,000 to $55,000 into one of the 37-footers no matter what equipment you used,” Roy Merritt was quoted with regard to 43 construction costs.
Even sitting static at the dock, a 43-foot Merritt is striking. The house is so balanced and proportional. Headroom is a 76 inches inside the cabin and underneath the tower over the flybridge, modest by today’s standards, but a large contributor to the symmetrical low profile.

Vito Costanza is the proud owner/captain the 43-foot Merritt SeaJeannie. Costanza follows the line of many past and present Merritt owners and is an avid bluefin tuna fisherman.
Aboard the SeaJeannie, it’s evident that the cockpit was designed for one purpose, fighting and landing large fish. Its extended length is nontraditional and low freeboard is functional. The reach to the water line is a 24 inches at the transom, increasing just a few inches traveling forward toward the cabin aft bulkhead.
A brace of cockpit freezers are integrated into the teak cockpit joinery on either side of the centerline cabin door. There are large capacity, naturally fed livewells below the teak cockpit sole on either side of the fighting chair.
An insulated deck hatch sits centerline forward of the wells beneath which a new Phasor generator sits. There are deep gutters and a shield to prevent water intrusion to the space, so the cockpit placement is no issue.
Storage compartments are under each gunnel, concealed by sculpted doors that blend into the cockpit sides. There’s ample room for long-handled items.
A lower station is situated starboard side with simple, single lever controls outboard of the helm pod. The mechanisms are old-school cable.
Merritt kept the interior layout to the form, function and simplicity of the day. Companionways are wide and open and Merritt utilized the precise interior area with purpose, not adding unnecessary or non-functional items.
There’s a berth-size settee port side and easily lifts to access the engine below. It’s obvious someone who actually worked on boats produced the design. A sizeable dinette is opposite the settee with a concise galley to port. A rod locker and ample drawers stash fishing gear. Over-under berths are notched in the forward vee.
Owning a classic is more than just owning a boat; it’s a commitment. Upkeep and maintenance are paramount. Merritt owners embrace the pledge to uphold the history of sportfishing. Based on that, you’ll likely be able to tell your grandchildren they just witnessed history as a 43-foot Merritt glides by.

MIDDLE: The cockpit was designed for one purpose, fighting and landing large fish.
RIGHT: The reach to the water line is a 24 inches at the transom.
“Perhaps the only thing Roy did wrong with the 43 is not building more. Well, actually, I take that back,” Costanza said after quick reflection and a smile.
BGFJ: How did you decide on a 40-year old Merritt?
VC: My last boat was a 38-foot Topaz flybridge. We ran that SeaJeannie for 16 years and loved its functionality and classic style. It was, nimble and had its niche; something that I find special to be built into a boat. I decided my “new boat” was going to be a true custom, cold-molded, nimble and classic. The list was short—the 43 Merritt.
BGFJ: Where did you find the current Sea Jeannie?
VC: Merritt 43 hull 25, Snee Kee Peet was built for Pete Benoit in 1976 and was actively fishing down at Los Suenos marina in Costa Rica. The boat was for sale but not actively positioned on the market. It took two years and multiple trips before we were able to officially buy the boat.
We shipped the boat back via freighter. Although the boat was in remarkably good condition, SeaJeannie went back to Merritt Boat and Engine Works for a nearly three-year refit under the great care of Roy, Mark and the rest of the Merritt crew. It’s still a work in progress but hard to beat.
BGFJ: How’s the ride of the Merritt boat??
VC: SeaJeannie is an incredible all around boat. She runs 25 knots at 2200 rpm. She’s remarkably smooth in a head sea, although a bit of spray might be the price for the ride. Hey, it’s a boat.
BGFJ: What comes with ownership of a Merritt boat??
VC: With a boat of such limited production, chances of casual sea trials simply don’t exist. I really didn’t know what to expect; it wasn’t fully established, at least for me, until I took ownership. Beyond the downright timeless lines, uniquely long, functional cockpit and tremendous fit and finish, I can say the reputation and legacy of the 43 Merritt are well deserved.
The boat maintains a stealth presence. Its cold-molded hull emits so little noise. There’s literally no vibration, cavitation, creeks or wakes. At nearly 20,000 lbs. you think its double the size. Yet she slides, not grinds on a fish and the 12-foot wide cockpit, low freeboard and clean uncluttered arrangement puts the ‘sport’ in sportfishing.
SeaJeannie is still a family boat. You’ll find her owner, wife Jeannie and his three boys plying the 30-fathom curve off Montauk or the early morning bit east of Chatham catching bluefins or enjoying a weekend on Cuttyhunk and Menemsha.


![furuno safety 468x60[61]](https://biggamefishingjournal.com/wp-content/uploads/Furuno-Safety-468x6061-2.gif)









